• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 262 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

[C5535] Booting from UART

TM4C1294NCPDT: can TM4C1294NCPDT MCU support the boot from external MCU via UART?

Iyyappan
Prodigy 140 points
Part Number: TM4C1294NCPDT
Other Parts Discussed in Thread: EK-TM4C1294XL

can TM4C1294NCPDT MCU support the boot from external MCU via UART?

Regards,

Iyyappan.V

iyyappan_krish@yahoo.co.in

  • 0
    TI__Guru**** 190806 points
    Hi,
    Please refer to the boot_serial example (this is a bootloader) and the boot_demo1 (this is an example application firmware) to be loaded to the flash by the boot_serial. The two examples can be found in <TivaWare_Installation>/examples/boards/ek-tm4c1294xl. Please also refer to the Boot Loader user's guide. It can be found in <TivaWare_Installation>/docs/SW-TM4C-BOOTLDR-UG.2.1.4.178.pdf.