Access ethernet with MSP432E401Y

nipun garg

Other Parts Discussed in Thread: MSP432E401Y

Hello

I am using MSP432E401Y development board and I want to setup MQTT protocol and board as a client. For access internet, through ethernet first, we have to fill the confirmation page.

Can anyone please help me in access web pages through MSP432E401Y development board.

Thank you

over 6 years ago

0 Sai Reddy over 6 years ago

TI__Mastermind 22580 points

Hello Nipun,

Please use the following example in the Simplelink MSP432E4 SDK: ./examples/rtos/MSP_EXP432E401Y/ns/mqttclient/

Thanks,

Sai

0 nipun garg over 6 years ago in reply to Sai Reddy

Prodigy 210 points

Hello Sai,

I run the example which you suggest and watch the output at Tera Term. All things are going smooth but the board is not making the connection with the mosquitto broker. Can you please suggest me a way through which I can check that board is accessing the internet.

Thank you

0 Sai Reddy over 6 years ago in reply to nipun garg

TI__Mastermind 22580 points

Hello Nipun,

The embedded application by itself does not have much to offer to figure out if an Ethernet connection has internet connection or not. That is for the user to identify. You could do that by connecting the same cable to a PC (be sure to turn off the Wi-Fi connection on the PC).

Thanks,
Sai

0 nipun garg over 6 years ago in reply to Sai Reddy

Prodigy 210 points

Hello Sai,
Once again, thanks for your support.

Arm-based microcontrollers

Arm-based microcontrollers forum

Access ethernet with MSP432E401Y