TMS570LC4357: HALCOGEN Software GUI is mixed up

Fehan Malik

Part Number: TMS570LC4357
Other Parts Discussed in Thread: HALCOGEN

I have installed the latest software of the HALCOGEN 04.07.01. However, its GUI has mixed up and overlapped button. Can TI look into this issue? I have windows 10. Image is attached.

over 6 years ago

0 QJ Wang over 6 years ago

TI__Guru**** 197426 points

Hell Fehan,

HALCoGen must be used with default 100% Font size only.



0 Fehan Malik over 6 years ago in reply to QJ Wang

Intellectual 550 points

How to control this font size?

0 QJ Wang over 6 years ago in reply to Fehan Malik

TI__Guru**** 197426 points

Hi Fehan,

I just tried different font size, and display resolution. The HALCOGen works fine for 100%, 125%, 150% font size. It may not be caused by the font size of windows 10.

0 QJ Wang over 6 years ago in reply to QJ Wang

TI__Guru**** 197426 points

Hi Fehan,

Do you use 4k display?

0 Fehan Malik over 6 years ago in reply to QJ Wang

Intellectual 550 points

QJ Wang,

No, I am not using the 4k monitor. However, after adjusting the Font size to 100 percent, it is working fine. On the higher Font display, it did not work.

Arm-based microcontrollers

Arm-based microcontrollers forum

TMS570LC4357: HALCOGEN Software GUI is mixed up