CCS/SAFETI-HALCOGEN-CSP: Regarding connection cable to use TAU

Sho Kobori

Part Number: SAFETI-HALCOGEN-CSP
Other Parts Discussed in Thread: HALCOGEN

Tool/software: Code Composer Studio

Hello,

I have the TMS570LC43X development kit, and I plan to use Halcogen-CSP. I would like to know regarding conection cable between this kit to Halcogen-CSP TAU. I already checked TAU and CSP user manual, but it didn't describe about connection cable.

Is the connection cable specified such as Debugger and Tracer?

If I can use Debugger, I would like to use XDS100v2. If usable connection cable is specified Tracer, I want to use Lauterbach.

Can I use Lauterbach?

Could you please tell me about connection cable detail information.

Thanks,

Sho

over 6 years ago

0 QJ Wang over 6 years ago

TI__Guru**** 199996 points

Hello Sho,

The tracer is not required to do the HALCoGen TAU test. Any JTAG emulators which supports Hercules MCUs can be used for this test. XDS100V2 works.

0 Sho Kobori over 6 years ago in reply to QJ Wang

Intellectual 640 points

Hi QJ,

Thank you for your information.

I understand that XDS100V2 works on the HALCoGen TAU test.

XDS100V2 is low-cost nad low-performance. I am not limited function of Halcogen TAU test, right?

Could you please recommend me about the debugger and reason.

Thanks,

Sho

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS/SAFETI-HALCOGEN-CSP: Regarding connection cable to use TAU