CCS/TM4C123GH6PM: CCS/Linux/Tiva C Stellaris icdi

matt proulx

Part Number: TM4C123GH6PM

Tool/software: Code Composer Studio

Just wondering if anyone has been able to get the stellaris icdi working on Linux or if there is another option through CCS. Thanks. (100% new to all of this)

over 6 years ago

0 Ralph Jacobi over 6 years ago

TI__Guru*** 135355 points

Hello Matt,

It's a little more complicated to setup in Linux, but there is a way to get the board programmed with CCS. This E2E thread discussed the needed steps to get it up and running, and you please start by referencing this? If you get stuck with any of these, let me know.

0 matt proulx over 6 years ago in reply to Ralph Jacobi

Prodigy 30 points

Thanks. I actually found some info on the script file and reloading udevadm in a comment on some article from a few years ago but that link will help me in the future should I need to do it again.

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS/TM4C123GH6PM: CCS/Linux/Tiva C Stellaris icdi