CCS: TMS570LC43 Safety library - HalCogen error

MINWOO LIM

Other Parts Discussed in Thread: TMS570LC4357, HALCOGEN

Tool/software: Code Composer Studio

I want to test Safety library.

I can use the project act well when i just import the project.

But, in the project, i generate HL code with HalCoGen project file "TMS570LC43X.hcg" which is located in "[project]\demo_app\HALCoGen\TMS570LC4357_NoOS"

If i use the generated HL file, I get error like this.

In HL_sys_intves.sam

dataEntry
        b   dataEntry
        b   phantomInterrupt
        ldr pc,[pc,#-0x1b0]
        ldr pc,[pc,#-0x1b0]

I want to know why this error occur and know about HalCoGen setting to act the safety library

over 6 years ago

0 Rahul Prabhu over 6 years ago

TI__Guru** 116170 points

MinWoo,

I will try to replicate the issue at my end and compare the prebuilt project with the generated project and get back to you on this issue.

Are you seeing a build error or a project generation error with that example

Regards,

Rahul

0 MINWOO LIM over 6 years ago in reply to Rahul Prabhu

Expert 1200 points

Hello Rahul,

I misunderstand of the HALCoGen.

Then, in the location "SafeTI Diagnostic Library\2.4.0\demo_app\HALCoGen\TMS570LC4357_NoOS",

TMS570LC43x.dil file is generated by the include source?

Then, how i can revise the halcogen data?

0 Rahul Prabhu over 6 years ago in reply to MINWOO LIM

TI__Guru** 116170 points

Sorry for the delayed response here. Can you please indicate if you have resolved this issue or if you still need our help with this issue.

Regards,

Rahul

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS: TMS570LC43 Safety library - HalCogen error