CCS/RM42L432: RM42L432PZT CCstudio Target configuration

deekshith BN

Part Number: RM42L432
Other Parts Discussed in Thread: CCSTUDIO,

Tool/software: Code Composer Studio

Hi,

Iam using RM42L432PZT device for development and iam using CCstudio 4.6.1.
which emulator and device specification has to select in the target configuration.

desktop has detected the driver XDS100 in the device manager.

Regards

deekshith

over 5 years ago

0 Miro over 5 years ago

TI__Mastermind 21425 points

Hello,

I assume you are using RM42L432 LaunchPad ( ).

RM42L432 LaunchPad has on board USB XDS100v2 JTAG debug emulator.

0 deekshith BN over 5 years ago in reply to Miro

Prodigy 40 points

Hi I need target configuration setup in codec omposer studio 4.6.1 for RM42L432PZT

Basic and advanced target configuration .

Regards

Deekshith

0 Miro over 5 years ago in reply to deekshith BN

TI__Mastermind 21425 points

Hello,

I am not sure XDS110 ob-board debuger is supported by CCS v4.6.1. Because of that I'll forward this thread to Code Composer Studio forum.

0 Ki over 5 years ago in reply to deekshith BN

TI__Guru**** 463021 points

Hi I need target configuration setup in codec omposer studio 4.6.1 for RM42L432PZT

No such CCS version exists. Please double check the CCS version you are using and report it to this thread.

To check you CCS version, go to 'Help -> About Code Composer Studio':

Thanks

0 deekshith BN over 5 years ago in reply to Ki

Prodigy 40 points

Hi,

CCC version 4.1.2.00027

Regards

Deekshith

0 Ki over 5 years ago in reply to deekshith BN

TI__Guru**** 463021 points

deekshith BN said:
CCC version 4.1.2.00027

That is a very old and unsupported version of CCS. I would recommend moving to a more recent version. If you are using a 32-bit windows version, then CCSv8.3.1 is recommended. If you are using a 64-bit version, then the latest CCSv9.2.0 is recommended.

Thanks

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS/RM42L432: RM42L432PZT CCstudio Target configuration