TMS570LC4357: Flash Memory

user5093781

Part Number: TMS570LC4357

Hello, When rewriting the entire flash memory area on board, is it only JTAG? If the entire flash memory area can be rewritten with SCI, will the pin setting be changed with hardware? Best Regards,

over 6 years ago

0 Miro over 6 years ago

TI__Mastermind 21425 points

Hello,

To write the Flash, initially you will need JTAG. If you upload Bootloader program with the JTAG then you can upload application using corresponding interface ( depends on Bootloader - UART or CAN for example ) .

Please take a look at these documents for more information on bootloaders:

0 user5093781 over 6 years ago

Intellectual 385 points

Thanks Miro.

Arm-based microcontrollers

Arm-based microcontrollers forum

TMS570LC4357: Flash Memory