CCS/LAUNCHXL2-RM46: hetIDE

rock

Part Number: LAUNCHXL2-RM46
Other Parts Discussed in Thread: HALCOGEN

Tool/software: Code Composer Studio

I m following example program mentioned below. here I m not able to watch pwm due to some missing things, when I m using hetInit(); compiler not able to access HET.h which was generated by HETIDE. can you please help me to finding these issues. something I m missing.

https://www.element14.com/community/community/applications/industrial-automation-space/blog/2017/06/10/stepper-motor-control-with-hercules-high-end-timer-part-7-het-assembly-language-test

8831.hetide.7z

over 4 years ago

0 Sunil Oak over 4 years ago

TI__Mastermind 49120 points

You do need to include “HET.h” in the C source file where you are referencing definitions from this header file.

0 rock over 4 years ago in reply to Sunil Oak

Intellectual 760 points

I have included HET.h

during debug,compiler is going inside hetInit() function, that is ok

problem is that, code generated by hetIDE is being skipped. is there any code is need to write in system_main.c or after putting hetInit() pwm will generate. bit confused.

0 Sunil Oak over 4 years ago in reply to rock

TI__Mastermind 49120 points

Hello,

Rename your HET program source file to something other than "HET". In HALCoGen point to the generated .c and .h files from the IDE. HALCoGen will also generate a hetInit() function in het.c that copies the HET program from Flash to the individual HET modules, and then enables the HET.

0 rock over 4 years ago in reply to Sunil Oak

Intellectual 760 points

thanks Sunil.

it works fine

regards

Rock

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS/LAUNCHXL2-RM46: hetIDE