• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 404 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

EK-TM4C1294XL: How to implement USB CDC using USB DMA ?

mau sk
Prodigy 10 points
Part Number: EK-TM4C1294XL

1. Is it possible to use USB CDC using USB DMA in TM4C1294 ?? (other forum threads discussed USB CDC DMA  in TM4C123,  but still want to confirm again with TM4C1294)

2. If yes, What are the steps to be followed to implement it ? 

  • 0
    TI__Guru*** 135355 points

    Hello Mau,

    Yes it would be possible to do this but we don't have an example in hand that demonstrates as much.

    I don't have the exact steps listed out anywhere, but you can look at this example to see what was done: [Install Path]\TivaWare_C_Series-2.1.4.178\examples\boards\ek-tm4c1294xl\usb_host_msc