CCS/TMS570LC4357: CAN on TMS570LC4357

Alex Ale

Expert 1160 points

Part Number: TMS570LC4357
Other Parts Discussed in Thread: HALCOGEN

Tool/software: Code Composer Studio

What it represents the "canMESSAGE_BOX1", 2, 3.. from

This canMESSAGE_BOX1 in Halcogen as I select it??

over 5 years ago

0 QJ Wang over 5 years ago

TI__Guru**** 196156 points

It is mailbox or message object. 1,2,3...64 are the message object number.

0 Alex Ale over 5 years ago in reply to QJ Wang

Expert 1160 points

If I have to transmit (temperature and voltage) I have to have ticked in Halcogen two houses "Message 1 configuration and Message 2 configuration"(or more??) and in CCS to write "canMESSAGE_BOX1" and "canMESSAGE_BOX2"??

0 QJ Wang over 5 years ago in reply to Alex Ale

TI__Guru**** 196156 points

You can use one mailbox to transmit temperature and voltage, or you can transmit temperature with mailbox1 and voltage with mailbox2.

canMESSAGE_BOX1: can message box 1, or message object 1

canMESSAGE_BOX2: can message box 2, or message object 2

0 Alex Ale over 5 years ago in reply to QJ Wang

Expert 1160 points

What is represents 0 and 1 ?How do I know what to check?

0 QJ Wang over 5 years ago in reply to Alex Ale

TI__Guru**** 196156 points

The 1 or 0 in DOUT means the output value when CAN pin are used as GPIO.

To TIOC and RIOC are used to configure the CAN pins as GPIO mode.

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS/TMS570LC4357: CAN on TMS570LC4357