Arm-based microcontrollers

Arm-based microcontrollers forum

State Resolved
Locked Locked
Replies 3 replies
Subscribers 31 subscribers
Views 372 views
Users 0 members are here

Support feedback

Options

Options

Related

RM48L952: Running free rtos on RM48L952ZWT

kunal singh

Prodigy 160 points

Part Number: RM48L952
Other Parts Discussed in Thread: HALCOGEN

I want to use FreeRtos on my device: RM48L952ZWT micro controller. I didn't found any procedure for using freertos through halcogen for my micro controller. The Free Rtos is provided for RM48L950ZWT in halcogen. So I need to port the freertos drivers to my device. Could I please get the porting procedure as I would be needing linker file as well to successfully port my device.

Thank you,

over 5 years ago

0 QJ Wang over 5 years ago

TI__Guru**** 198766 points

Hello,

Please refer to the example code in HALCOGen. This example shows you the HALCOGen configuration for freeRTOS step by step.

0 QJ Wang over 5 years ago in reply to QJ Wang

TI__Guru**** 198766 points

HALCOGen help also provides a link for freeRTOS quick start:

0 kunal singh over 5 years ago in reply to QJ Wang

Prodigy 160 points

Hello,

Thank you for the help. I was successful in running freertos on my device.

I want to run Tcp/ip stack on the freertos which I have just implemented.

It would be really helpful if you guide me on the procedure of how to run this stack using halcogen.

Thank you,