CCS/TMS570LS3137: DMM module test

zhang jiayi

Part Number: TMS570LS3137

Tool/software: Code Composer Studio

I dont't know what type of device to interface with DMM module to test this module and may not have such a device. Can I just use CCS to configurate the DMM module pin to take the place of external device and how to configurate it.

Regards

over 5 years ago

0 QJ Wang over 5 years ago

TI__Guru**** 197336 points

Hello,

The DMM stands for Data Modification Module, and RTP means RAM Trace Port (please refer to TMS570LS31x Datasheet). DMM and RTP are used to trace data write/read to internal RAM, or to write/read data directly to/from the RAM. The HDK has footprints for DMM and RTP, but the connectors are not populated.

I don't have examples for using DMM and RTP. Consider the following documents from iSystems as an example:

www.isystem.com/.../IC30323_D1_13.pdf
www.isystem.com/.../IC30324_11.pdf

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS/TMS570LS3137: DMM module test