• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 226 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TM4C123GH6PM: Debuger USB port

user5958689
Prodigy 10 points
Part Number: TM4C123GH6PM
Other Parts Discussed in Thread: EK-TM4C123GXL

Hi guys,

I broke the debuger USB port on my kit. Is there any way  to debug program without this port?

Thank you.

  • 0
    TI__Guru 72500 points

    Yes it is possible, but it would be cheaper to buy a new EK-TM4C123GXL Launchpad ($12.99). You would need to have a JTAG scan controller and hand wire it to the  TCK, TMS, TDO, TDI test points. Also the EXT DBG test point must be pulled low. You can power the Launchpad through the device USB port by moving the power switch to "DEVICE".  The XDS110 scan controller is $99.