Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed the week of November 23.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS570LS3137: Parallel CS Access of EMIF

Part Number: TMS570LS3137

Hi Team,

Our customer would like to interface their FPGA with TMS570LS3137 through EMIF (Asynchronous memory). To have more address space for FPGA communication, is it possible to access two or three chip select in parallel in TMS570LS3137?

Thanks in advance!


Kind Regards,

Jejomar

  • Hello Jejomar,

    Only one chip select can be enabled at a time. The device has 22 dedicated EMIF address lines, this means it supports up to 16MB memory size. If a large asynchronous flash (<64MB) needs to be attached to the EMIF, then GPIO pins may be used to control the flash device’s upper address lines.