CCS/LAUNCHXL2-570LC43: TMS570LC43X

Advaith

Intellectual 885 points

Part Number: LAUNCHXL2-570LC43

Tool/software: Code Composer Studio

Hello community,

I'm thanking everyone for supporting me in all my questions.

As a starting point for developing TCP/IP application, I was able to complete the lwip project provided by TI.

I don't know which file is to be included in the build and which function is to be called. I am sharing my project with this. Please look into it and guide me to reach there

4454.ith vare....zip

over 5 years ago

0 QJ Wang over 5 years ago

TI__Guru**** 200256 points

Hello,

1. create new tcp pcb:

pcb = tecp_new();

2. bind pcb to port, for example port 7

tcp_bind(pcb, IP_ADDRESS, 7);

3. start tcp listening

pcb = tcp_listen(pcb);

4. initialize LwIP tcp_accept callback function

tcp_accept(pcb, tcpdemo_accept);

I don't know the details of using LWIP TCP stack. Please refer to the lwip.pdf in the doc folder of your project.

0 Advaith over 5 years ago in reply to QJ Wang

Intellectual 885 points

Hello QJ

Only these functions are to be called?

Regards,

Advaith

0 QJ Wang over 5 years ago in reply to Advaith

TI__Guru**** 200256 points

Hello Advaith,

We don't have a working example of tcp/ip except the active webserver.

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS/LAUNCHXL2-570LC43: TMS570LC43X