Development board with integrated external FLASH and SDRAM memory and Ethernet (case CS0311566 )

rudolf pribis

Other Parts Discussed in Thread: LAUNCHXL2-RM57L

Hello,

I was redirected from case CS0311566 to E2E support.

I am building an embedded system and the program exceeds MCUs FLASH and RAM. Therefore I am looking for something like STM32F769I-DISC1 in TI suit.

In other words I am looking for a development/evaluation board with

- Ethernet conectivity

- external SDRAM 128Mb

- external FLASH 512Mb

- LWIP with freeRTOS

Thanks

Rudo

0 Dennis Lehman over 5 years ago

Hello rudolf,

The MSP432E401Y family has ethernet and an external bus (EPI) external peripheral interface. Here is some information from the datasheet.

Regardin the lwip, see the SDK.

0 rudolf pribis over 4 years ago in reply to Dennis Lehman

Hi Dennis

could by possible to extend LAUNCHXL2-RM57L with TM4C129SDRAMNVM?

0 Dennis Lehman over 4 years ago in reply to rudolf pribis

Hi Rudolf,

Unfortunately I don't support that product family so I can't answer that question.

I would suggest that you post your questions on our Processors Forum.

Arm-based microcontrollers forum