RM57L843: Integrating safety library with IAR.

Shantanu Salunkhe

Intellectual 440 points

Part Number: RM57L843

Hi,

I want to integrate SafeTI Diagnostic library in my project which in IAR Embedded workbench.

How can i do that. Please provide steps to do the same.

Thanks,

Shantanu S.

over 4 years ago

0 QJ Wang over 4 years ago

TI__Guru**** 196776 points

Hello,

There are several examples of using the library in IAR workbench. Those example were developed for RM48, RM46, RM44. I am sorry we don't have example for RM57.

Please check the examples under:

...\ti\Hercules\SafeTI Diagnostic Library\2.4.0\build

0 Shantanu Salunkhe over 4 years ago in reply to QJ Wang

Intellectual 440 points

Hello,

On the webpage of SafeTI Hercules Diagnostic Library, in features it says : "Support for IAR IDE and tool chain (not for the TPS65381 driver or the RM57Lx and the TMS570LC43x devices)" .

So if Library doesn't have support for RM57Lxx for IAR tool chain, will it be useful even if we somehow add it to IAR project?

Thanks,

Shantanu S.

0 QJ Wang over 4 years ago in reply to Shantanu Salunkhe

TI__Guru**** 196776 points

Hi,

The IAR supports RM57Lx device. I don't have IAR workbench, so I'm not sure about SDL on IAR.

0 Shantanu Salunkhe over 4 years ago in reply to QJ Wang

Intellectual 440 points

Hi,

We have a requirement for SafeTI Diagnostic library in IAR in our project. We want SDL to be integrated in IAR toolchain, is there a way in which TI can provide support for this issue. Or is there any commercial aspect to this, we can communicate in personal mail/chat.

Please let me know which of the following is possible.

Thanks,

Shantanu S.

Arm-based microcontrollers

Arm-based microcontrollers forum

RM57L843: Integrating safety library with IAR.