Hi Sir,
I am using Launchpad-CC2640R2F, having trouble trying to flash the XDS firmware using the instructions provided by Adrian (https://e2e.ti.com/support/sensors/f/1023/p/827266/3060977?tisearch=e2e-sitesearch&keymatch=xdsdfu.exe#3060977) . When I try to update the bootloader I get the error: "Unable to open the file boot_loader.bin. Does it exist?" despite it sitting in the directory next to xdsdfu.exe. If I then tell it to update the firmware it says it downloads to the device, but if I check with xdsdfu.exe -e again, nothing has been updated. why the bootloader file isn't found?
the boot_loader.bin is in the same folder and Board is in DFU Mode.
I fallow
How to program a new bootloader and firmware into the XDS110 probe:
C:\ti\ccsv8\ccs_base\common\uscif\xds110\xdsdfu -m
C:\ti\ccsv8\ccs_base\common\uscif\xds110\xdsdfu -b boot_loader.bin -r ( I get the error: "Unable to open the file boot_loader.bin. Does it exist?")
C:\ti\ccsv8\ccs_base\common\uscif\xds110\xdsdfu -m
C:\ti\ccsv8\ccs_base\common\uscif\xds110\xdsdfu -f firmware.bin -r
Regard's
Toravi
