CCS/TMDS570LS31HDK: ULINK 2

Rahul T1

Intellectual 790 points

Part Number: TMDS570LS31HDK
Other Parts Discussed in Thread: TMS570LS3137-EP

Tool/software: Code Composer Studio

Can I use Ulink 2 (by Keil) for TMDS570LS31HDK?

For more details:

www.keil.com/.../ulink2_hw_connectors.htm

over 5 years ago

0 Rahul T1 over 5 years ago

Intellectual 790 points

We are going to design board for TMS570LS3137-EP, Can I use Ulink 2 for that?

0 QJ Wang over 5 years ago in reply to Rahul T1

TI__Guru**** 198766 points

The ulink JTAG debugger supports TMS570LSx devices before. I am not sure if the latest the version supports TMS570 devices.

The TI Code Composer Studio doesn't support ULink emulator. The nTRST (Test Reset signal) should be included in your JTAG connector on your board.

0 Rahul T1 over 5 years ago in reply to QJ Wang

Intellectual 790 points

Why TI Code Composer Studio doesn't support ULink emulator?

The nTRST (Test Reset signal) is included in JTAG connector.

0 QJ Wang over 5 years ago in reply to Rahul T1

TI__Guru**** 198766 points

I don't know why the Code Composer Studio doesn't support ULink emulator. Please use a JTAG connector whose pinout contains the JTAG signals supported by TMS570 device.

0 Rahul T1 over 5 years ago in reply to Rahul T1

Intellectual 790 points

Can I use Ulink-2 for TMDS570LS31HDK?

0 QJ Wang over 5 years ago in reply to Rahul T1

TI__Guru**** 198766 points

You can use Ulink-2 if the IDE you are using supports TMS570 devices.

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS/TMDS570LS31HDK: ULINK 2