HALCOGEN: Which Output-file will be changed by HALCoGen when the Stack configration changed ?

user4127213

Part Number: HALCOGEN
Other Parts Discussed in Thread: RM48L952

Dear All,

I would like to change RAM Configration by HALCoGen because I faced stack overflow. Could you tell me whick output file will be changed when I changed Stack Configuration by HALCoGen?

I believe that only the fsys_startup.c file will be modified. Is it correct? I use RM48L952.

Best Regards,

Sone

over 4 years ago

0 QJ Wang over 4 years ago

TI__Guru**** 196346 points

Hello Sone,

If you only change the Stack Configuration, only _coreInitStackPointer_() in sys_core.asm will be updated.

If you change the length of RAM, the memory section in linker cmd file will be changed.

0 user4127213 over 4 years ago in reply to QJ Wang

Prodigy 250 points

Dear QJ Wang,

THank you for your information. I understand that. I will try to sys_cor.asm.

Best Regards,

Sone

Arm-based microcontrollers

Arm-based microcontrollers forum

HALCOGEN: Which Output-file will be changed by HALCoGen when the Stack configration changed ?