TNETV2502 Processor for IP Telephone

sridhar prateep

Other Parts Discussed in Thread: MSP430FR5994, TMS320C5535

Dear sir,

we are not getting TNETV2502 Processor full datasheet . so please provide details about TNETV2502 Processor for IP Telephone

My second Question is if we take TLV320AIC33IRGZR_VQFN-48 CODEC and interphase with MSP430 Microcontroller (CODEC is in I2S and Ethernet PHY) Can it work without any latency for IP Telephone?

Please guide us.

Regards,

nsprateep@sirveen.com

over 3 years ago

0 Leonardo Estevez over 3 years ago

TI__Genius 12615 points

Hi Sridhar,

The processor used the in TNETV2502 design: https://www.ti.com/pdfs/bcg/spry098.pdf is the TMS320C55x. The datasheet for this DSP can be found here: https://www.ti.com/product/TMS320C5535

When integrating the TLV320AIC with an MSP microcontroller, there will be some latency associated with the communication.

I would recommend evaluating the MSP430FR5994 with integrated acceleration for your codecs along with this boosterpack:

https://www.ti.com/tool/BOOSTXL-AUDIO#overview

BR,

Leo

0 sridhar prateep over 3 years ago in reply to Leonardo Estevez

Intellectual 305 points

Dear sir,

Thank you for your support.

Sir For IP Telephone

1. TMS320C5535 howmuch external RAM required?

2. For CODEC interphase I2S0 transmit data output I2S0_DX ,I2S0 receive data input I2S0_RX. , I2S0 clock input/output I2S0_CLK. I2S0 frame synchronization input/output I2S0_FS. With these I2S pins FullDuplex Communication can achive.

3. Have refrence TMS320C5535 SIP protocals

0 sridhar prateep over 3 years ago in reply to sridhar prateep

Intellectual 305 points

Dear sir,

Thank you for your support.

Sir For IP Telephone

1. TMS320C5535 howmuch external RAM required?

3. You have any refrence TMS320C5535 SIP protocals?

Arm-based microcontrollers

Arm-based microcontrollers forum

TNETV2502 Processor for IP Telephone