MSP-EXP432P401R: unconnected debug site

FRANK1

Part Number: MSP-EXP432P401R

Hi sir,

My customer use MSP-EXP432P401R be connected to TIRSLK-EVM.

He followed user's guide, power and everything works, he is currently trying to debug and make sure everything works
but he can't get it to connect to the debug site (GUI test tool)

eventlog.csv

The file is from the logs.
He has used the USB cord that was included with the kit.

Thank you for your valuable advice.

Thanks,

Regards,

over 4 years ago

0 Johnson He over 4 years ago

TI__Mastermind 29266 points

Hi FRANK，

Do you follow this below document step?

https://www.ti.com/lit/ml/sekp166/sekp166.pdf

And do you bealbe download the firmware normally?

You can also check if the driver of XDS110 in install normally.

Thanks!

Best Regards

Johnson

0 FRANK1 over 4 years ago in reply to Johnson He

TI__Expert 8535 points

Hi Johnson，

Yes, he did。

0 Johnson He over 4 years ago in reply to FRANK1

TI__Mastermind 29266 points

Hi Frank,

They can download the firmware normal but can't connect MCU to GUI? Right?

Thanks!

Best Regards

Johnson

0 FRANK1 over 4 years ago in reply to Johnson He

TI__Expert 8535 points

Hi Johnson,

Yes, he can't get MCU to connect to the debug site (GUI test tool).

Thanks.

0 Johnson He over 4 years ago in reply to FRANK1

TI__Mastermind 29266 points

Hi Frank,

I don't have the TIRSLK-EVM, thus can't do some test, but I have a look for this design, there are a lot of seeting, please check if the code match the seeting.

I will try to apply this demo, and do the test later if i can get this demo.

Thanks!

Best Regards

Johnson

Arm-based microcontrollers

Arm-based microcontrollers forum

MSP-EXP432P401R: unconnected debug site