Using Tensorflow for microprocessors on TI MCUs

Li Chen92

Hi TI expert

I am interested in using Tensorflow for Microprocessors on TI MCUs. Want to get away from Adruino or other development boards so I can do bare metal.

Can you suggest an approach?

Best regards,

Thomas

over 4 years ago

0 Arnon Friedmann over 4 years ago

TI__Intellectual 2465 points

Is there a particular price point or MHz range you are looking for? We have a wide range of microcontrollers, you may want to start here: https://www.ti.com/microcontrollers-mcus-processors/microcontrollers/arm-based-microcontrollers/overview.html

0 Li Chen92 over 4 years ago in reply to Arnon Friedmann

TI__Expert 3040 points

Hi Arnon Friedmann

I am interested in whether I can use, e.g., the cortex M4 as is used on the TI Tiva C series Launch pad for starters. Low power applications. I am already familiar with that processor. Do you have any resources for building applications using Tensorflow light and micro?

Best regards,

Thomas

0 Arnon Friedmann over 4 years ago in reply to Li Chen92

TI__Intellectual 2465 points

I will need to forward this to the Tiva team to check. I don't know if we have tensor flow light/micro support for non-Cortex-A cores.

0 Ralph Jacobi over 4 years ago in reply to Li Chen92

TI__Guru*** 135355 points

Hello Li,

We do not have anything akin to Tensorflow for TM4C microcontrollers and I don't even know if something like that is even portable into our products. We have never seen anything machine learning related being used on TM4C. This is not an area we will be able to provide any guidance or support for due a lack of any knowledge surrounding machine learning.

Best Regards,
Ralph

Arm-based microcontrollers

Arm-based microcontrollers forum

Using Tensorflow for microprocessors on TI MCUs