TMS320F28379D: TMS320F28379D FLASH PROGRAMMING STAND ALONE

Juan de Jesus

Part Number: TMS320F28379D
Other Parts Discussed in Thread: C2000WARE

Good morning:

I am working with a TMS320F28379D microcontroller. Please, I would like to know about the process that I must follow to save and run the C code algorithm in the Flash memory of this microcontroller in a stand alone mode.

I am using CCS code composer studio and C2000Ware.

Could you please help me in this procedure?

Many Thanks

over 4 years ago

+1 Vamsi Gudivada over 4 years ago

TI__Guru* 87105 points

Juan,

Did you try C2000Ware examples with flash build configuration? If not, please try.

Also, please go through this FAQ: How to modify an application from RAM configuration to Flash configuration: https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/878674

When the application is mapped to flash, CCS will automatically invoke the flash plugin to load the code in to the flash when you do "program load".

Let me know if you have any specific question.

Thanks and regards,
Vamsi

+1 Vamsi Gudivada over 4 years ago in reply to Vamsi Gudivada

TI__Guru* 87105 points

Juan,

Do you need any other information? Or can I close this thread?

Thanks and regards,

Vamsi

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28379D: TMS320F28379D FLASH PROGRAMMING STAND ALONE