TMS320F28035: Sample source codes for C2000 to configure TDC1000

fayas farook

Prodigy 31 points

Part Number: TMS320F28035
Other Parts Discussed in Thread: TDC1000, C2000WARE

Hi,

Can I have source code for C2000 to configure TDC1000. For fuel level measurement purpose.

Thank you.

over 4 years ago

0 Marlyn Rosales Castaneda20 over 4 years ago

TI__Mastermind 26480 points

Hi Fayas,

I see that you have an ongoing thread on another forum: https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1043836/tdc1000-configuring-tdc1000

It looks like you will need to configure the TDC1000 via SPI. C2000 has SPI examples to help you get started with this development but not the source code for configuring the TDC1000. Please take a look at our spi software examples located in C2000Ware:

C:\ti\c2000\C2000Ware_version\device_support\f2803x\examples\c28

I've also looped in the Sensing team in case they have further commentary.

Best Regards,

Marlyn

0 Arjun_Prakash over 4 years ago in reply to Marlyn Rosales Castaneda20

TI__Expert 7599 points

Hi Marlyn,

Thanks for pointing resources on the C2000.

Hi Fayas,

If you like more information on the TDC1000 register control clarifications. Please do let us know.

0 fayas farook over 4 years ago in reply to Marlyn Rosales Castaneda20

Prodigy 31 points

Hi Marlyn,

Thank you for the response. I'll go through the examples.

thank you

0 fayas farook over 4 years ago in reply to Arjun_Prakash

Prodigy 31 points

Hi Arjun,

okay I will let you know if I needed any helps. thank you for you response.

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28035: Sample source codes for C2000 to configure TDC1000