Hi Everyone,
Greetings...!!!
During some operation controller Flash was overwritten till end by some random number. Now during flash following error I am getting:
C28xx: GEL Output:
ADC Calibration not complete, check if device is unlocked and recalibrate.C28xx: GEL Output:
ADC Calibration not complete, check if device is unlocked and recalibrate.C28xx: Flash Programmer: Device is locked or not connected. Operation cancelled.
C28xx: GEL: File: D:\CCS_Work\Workspace\Project_TCP_Aux_V0\Debug\Project_TCP_Aux_V0.out: Load failed.
Kindly let me know, how to solve it.
Thanks in advance,
Regards,
RS