Part Number: TMS320F28035
Other Parts Discussed in Thread: UNIFLASH
Hi,
have been trying to implement my project to Texam Instruments C2000 Picolo F28035 however, I am getting an error in MATLAB 2021b as follows:
Error occurred while executing External Mode MEX-file 'ext_comm': Failed to connect to the target. A time-out occurred while waiting for the connection response from the target. Possible reasons for the time-out:
a) The target is not switched on.
b) The target is not connected to your host machine.
c) The application for the model is not running on the target. You might have clicked the Stop button. If the Run button is not dimmed, click it. Otherwise, click the Build button, which downloads and runs your application on the target.
I checked COM port and Target hardware configuration settings they are all set. Also, all the necessary support packages including mingw C/C++ compiler is also installed successfully. I also get same error for the Arduino boards as well. I checked other solutions on the web but I could not get rid of this error. I am attaching some screen shots from my Hardware Settings regarding to F28035. I can build the code succesfully but I can not connect my board. Baudrate is also matched with COM port that F28035 is connected. I can flash the hex files using UNIFLASH which means USB ports are working and it can communicate with the board. Please suggest me a specific solution rather than driver, support packages etc.
Screen shots:
,
