TMS320F28069: Configuration of terminal window

Hello,

If you are asking about how to use the Terminal view in CCS, please see the below link:

https://dev.ti.com/tirex/explore/node?node=AGvieKXZN2wbWARe5-Skdw__FUz-xrs__LATEST

Thanks

ki

In the device manager, expand the "Ports" node to see the COM port for your XDS100v3.

For example, on my PC I see:

Thanks. I don't think OLIMEX exposes the second com port like how it does for my Spectrum Digital XDS100v3 probe.

Please see my post in the below thread:

https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/646137/ccs-tms320f28377s-xds100-v2-does-not-show-up-in-com-ports/2379561#2379561

Note that the wiki link I reference is no longer available. However, there is a PDF archive of it:

https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/files/XDS100.pdf

See page 9:  FAQ: “How can I use the XDS100v2's second port as a serial port (UART)?”
Notice that in the link they talk about XDS100V2 but in the end V3 is very similar to V2 except that V3 supports also IEEE 1149.7.

Just follow those instructions and you'll get the COM port up and running.

Thanks

ki