TMS320F280039C: How to configure Timer1 interrupt (INT13) with Matlab embedded coder

Marc Ferrer

Part Number: TMS320F280039C

Dear expert,

Im using Matlab R2020b for code generation and Embedded coder support package for TI C2000. when using C28x HW interrupt block, I found out I can generate the interrupt function for INT1 to INT12 but not for INT13 and above. Is there any way to work with INT13?

Regards,

Marc Ferrer

over 2 years ago

0 Santosh Jha over 2 years ago

TI__Guru 50470 points

Hi,

Please take a look at MathWorks FAQ at this link below:

https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/484814/faq-sticky-mathworks-solutions-for-c2000-mcu-s
https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/944441/faq-faq-support-for-using-mathworks-solutions-with-c2000-mcu-s

If you have further questions, the best way to get support on MathWorks products is to contact MathWorks live tech support.

You can also search for answers or post a question on MATLAB Answers C2000 forum. Additionally, there is info on MathWorks support C2000 in Documentation and Examples.

I will close the thread from here as the software is supported by MathWorks team on their forum.

Thanks & Regards,

Santosh

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F280039C: How to configure Timer1 interrupt (INT13) with Matlab embedded coder