C2000-GANG: Causing Error 66

ArTzy

Part Number: C2000-GANG

Hi Experts,

Seeking your assistance on this query from Cx:

I purchased TI device c2000 gang and tried to program ic but it is causing error no. 66. I am using mcu tms320f28062pzt connection type jtag fast and it is causing me error number 66,so i need technical support how to remove this error and continue programming. I also have attached screenshots.

Shared this LINK but not help.

See snapshots shared. Thank you.

Regards,
Archie A.

over 2 years ago

0 Kier over 2 years ago

Mastermind 9345 points

Please contact Elprotronic for any support at support@elprotronic.com.

By the way, it's very difficult to read the detail in your screenshots. They are too small.

0 MatthewPate over 2 years ago in reply to Kier

TI__Guru* 80640 points

Archie,

I'm not sure why the screen shots aren't zooming up more, but they are small for some reason as Kier mentioned. You can try to attach the images as files to see if that will help.

Do you have a XDS110 or other debug probe you could use to connect CCS to the target? Do the CCS flash tools work correctly? Just trying to make sure if this is a GANG issue or a device issue.

Best,

Matthew

0 ArTzy over 2 years ago in reply to MatthewPate

TI__Genius 17945 points

Hi Matthwe/Kier,

Regarding the snapshot, I don't know but I can zoom in them (from upper left side) then scroll and see clearly the attachment.

Attaching them below. Thank you.

Regards,
Archie A.

sn_customerservice.zip

0 ArTzy over 2 years ago in reply to MatthewPate

TI__Genius 17945 points

Hi Matthew,

The customer use XDS 100 V2. Will also attach the picture of it and it is the gang issue my emulator is working properly. They also want to know, does Gang 2000 has any bugs in it or what can be the other issue?

Thank you.

Regards,
Archie A.

0 MatthewPate over 2 years ago in reply to ArTzy

TI__Guru* 80640 points

Artzy,

Another customer just posted this https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1230144/c2000-gang-how-to-deal-with-error-27-and-error-69. Can we see if your customer is also using the CLA on the F2806x? And if so follow the steps in the linked post and see if that fixes things?

Best,
Matthew

C2000™︎ microcontrollers

C2000 microcontrollers forum

C2000-GANG: Causing Error 66