• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 213 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMS320F28335: CPU is not running after power off / on, but it runs after FLASH load

LAUNCHXL-F2800137: power ON reset issue

Siddhant Kulkarni
Prodigy 50 points
Part Number: LAUNCHXL-F2800137

After Reset or Power on/off code is not working and getting stuck at memory location

i tried CPU reset and code was at 3fe8f2:   28AD00A0    MOV          @SP, #0x00a0

and as i tried running code it stuck at 3fd4d0:   7625        ESTOP0       

please help with this .

  • 0
    TI__Guru** 113555 points

    Hi Siddharth,

    If you have debugger connected, you need to setup the emulation boot properly to run the CPU code. Please refer the emulation boot detail in TRM.

    Regards,

    Vivek Singh