TMDSDOCK28035: Questions about the connector for inserting the controlCARD

Takumi Kimura

Part Number: TMDSDOCK28035
Other Parts Discussed in Thread: TMDSCNCD28035, TIDM-BIDIR-400-12

Hello, Team,

Thank you for continuing to support me.

I’d like to ask about a connecter which is for inserting the controlCARD on the board, TMDSDOCK28035.

1. Is it able to insert TMDSCNCD28035 to the connector?
2. Is the manufacturer part number of the connector 87630-1001 by Molex?

I appreciate your every support.

Best Regards,
Takumi

over 2 years ago

+1 Cody Watkins over 2 years ago

TI__Mastermind 42195 points

This is a DIMM 100 connector. It has been discontinued by Molex and other manufacturers. Please note that this is an older C2000 device. F280039C, and F280049C offer more features at a better cost point. their tools use an HSEC 120 connector.

https://www.ti.com/tool/TMDSCNCD280039C

https://www.ti.com/tool/TMDSCNCD280049C

Similarly there are more devices which are even lower cost, or contain more features if needed. But the above two devices are as close as possible to the F28035 feature set.

HSEC connectors and descriptions: https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/369066/can-anybody-share-the-library-eagle-cad-of-hsec8-180pin/1298374#1298374

Regards,
Cody

0 Takumi Kimura over 2 years ago in reply to Cody Watkins

Prodigy 100 points

Dear Cody,

Thank you for checking and replying quickly.

I’d like to think about it.

By the way, you know, as I said before, I’d just like to “prototype” the reference design, TIDM-BIDIR-400-12. In other words, it is not for products and rework components, including the connector 87630-1001 by Molex, are available. Then, I came up with the idea that if I remove the solder which connects the connector and TMDSDOCK28035, I could get the DIMM connector, 87630-1001, and apply the connector to the converter.

I’d like to try the above way first.

I appreciate your every support.

Best Regards,

Takumi

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMDSDOCK28035: Questions about the connector for inserting the controlCARD