• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 82 subscribers
  • Views 452 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LAUNCHXL-F28P65X: ETHERCAT feature

LAUNCHXL-F28P65X: Not able to run the launchpad configuration in the EtherCAT example

Hang Yang
Intellectual 2801 points
Part Number: LAUNCHXL-F28P65X
Other Parts Discussed in Thread: C2000WARE

Tool/software:

Hi experts,

I have an issue similar to the related question. When select the "LAUNCHXL_RAM" configuration, I have a missing c2000ware_libraries.cmd.genlibs error.

I tried to remove the c2000ware_libraries.cmd.genlibs in linker settings like the related question suggests, but still have the ".TI.ramfunc" section error.

Maybe I should add the ".TI.ramfunc" section specification to cmd as another patch? 

In the meantime, since I am seeing errors when compiling an example, I am wondering if this build configuration has been tested? 

Thanks,

Hang.

  • 0
    TI__Mastermind 36526 points

    Hi Hang,

    This is a known issue with the launchpad build configurations, this should be fixed in future versions of C2000WARE. 

    Please ask the customer to use the non-launchpad build configurations, then add _LAUNCHXL_F28P65X to the predefined symbols of the project.

    Best Regards,

    Ben Collier