• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 81 subscribers
  • Views 102 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMDSCNCD28335: not able to connect in external mode

TMDSCNCD28335: SW1 dip switch of the F28335 Controlcard

Juan Pérez Torreglosa
Prodigy 10 points
Part Number: TMDSCNCD28335
Other Parts Discussed in Thread: TMS320F28335, TMDSDOCK28335

Tool/software:

Hello, 

I have a TMDSDOCK28335 (TMS320F28335 Experimenter Kit) and I've been experiencing some problems when I use it with Simulink in external mode. The support team of Matlab told me that I have to switch on the SW1 of the Controlcard. The problem is that I see that this switch is a dip switch that has a tape and I don't know how to remove it to have access to the switch. I've been searching on datasheets, YouTube videos, tutorials,... But I don't find any useful information about it. May anybody tell me how to remove the tape to be able to change the position of this switch? 

Thanks.