Starting a project with F28035

Here's a wiki link that explains the CC3.3 installation : http://processors.wiki.ti.com/index.php/CCS_3.3

Hi, I'm still with problem to work with installation of the "piccolo" driver.

I don't have a Factory Board in the Code Composer Studio Setup for F2035 MCU, so I tryed to use the F2812. But didn't work.

Shouldn't I find and use a F2035?

I tried to create a board but it didn't work too.

What sould I do?

I tried to follow the steps from this link http://support.spectrumdigital.com/ccs31/manual/, in step 6 I selected TMS320F2800.

The difference is, I'm using the CCS3.3 and TMS320F28035.

After the configuration I start the CCS and try to connect with the board but it give me an error.

Mario,

What exact error did you get? Can you send us the snapshot? It should be relatively easy to change the gel file to work on F28035.

Regards,

Manoj

Hello Vaishnavi,

it was exactly what I was doing, but I don't know why didn't work.

But, when I restart my computer it start to work, thank's for your help.

Looks like it didn't recognize the driver settings for some reason until you restarted.

Glad it worked