This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
I am trying to control the system using this MCU.
Both CPU1 and CPU2 are operating normally, but CPU1's CLA1 keeps encountering a 0x0000 error (I will attach a picture below).
I would like to know the necessary conditions for enabling CLA1 in this project.
I am also attaching the project files for reference.
Lee
Apologize for the delay in responding
Are you able to load the symbols and run the CLA code ? Can you put a breakpoint and see if the execution halts at the breakpoint on the CLA ?
Pls refer the following link and see if it helps in debugging
https://software-dl.ti.com/C2000/docs/cla_software_dev_guide/debugging.html
Best Regards
Siddharth