• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 83 subscribers
  • Views 117 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMS320F28P650DK: Debug example code named "led_ex2_blinky_sysconfig_multi" failed. how to run the debug?

TMS320F28P659DK-Q1: Not able to flash example "led_ex2_blinky_sysconfig_multi" into lunckpad

Rajesh Mallik
Prodigy 40 points

Part Number: TMS320F28P659DK-Q1
Other Parts Discussed in Thread: TMS320F28P650DK, SYSCONFIG, C2000WARE

The exact problem I am facing mentioned in below thread (attached scheenshort):
TMS320F28P650DK: Debug example code named "led_ex2_blinky_sysconfig_multi" failed. how to run the debug?

How to resolved this issue.Screenshot 2025-11-15 111933.png

  • 0
    TI__Genius 9011 points

    Hi Rajesh,

    Can you please tell me how did you flash the code?

    The CPU1 application assigns the ownership of these memory regions to CPU2 by using SysConfig. Please note that CPU2 .out file can be loaded only after CPU1 completes this configuration.

    Please have a look at the example description and let me know if you are still facing the issue. The syscfg file is different for the Launchpad and control card, please update the build config accordingly.

    I will suggest to use the latest C2000Ware SDK 6.00.01 - C2000WARE Software development kit (SDK) | TI.com

    Thanks

    Aswin