TMS320F2812 Hardware Problem

F2812

Other Parts Discussed in Thread: TMS320F2812

Dear sir,

I have developed the evaluation board for TMS320F2812. i couldnt able to detect the board. how can i debug it. any one can help me.

The spec is:

20MHz, SCI programming using CODE SKIN C2000 prgorammer.

All Voltages are fine.

thanks in advance.

Malaiyappan

0 BrandonAzbell over 17 years ago

Which evaluation board are you referencing?

What emulation pod model number are your using?

0 F2812 over 17 years ago in reply to BrandonAzbell

Im using my own developed baord.

The spec is:

20MHz, SCI programming using CODE SKIN C2000 prgorammer.

All Voltages are fine.

Thanks for your reply

malaiyappan

0 BrandonAzbell over 17 years ago in reply to F2812

How do you have the GPIOs configured which are used to determine the boot mode?

To boot from SCI_A the following is required:
GPIOF4 = 0
GPIOF12 = 0
GPIOF3 = 1
GPIOF2 = 1

Secondly, are you able to interact with the target hardware using Hyperterminal as suggested in Section 3.3.3 of the SPRAAQ2?

C2000 microcontrollers forum