• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 749 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

running from flash in f28335 dsp....

Joseph Peter
Intellectual 665 points

Other Parts Discussed in Thread: TMS320F28335, CONTROLSUITE

hi

 i have an f8335 flash example code....i imported the project and build it...although the built completed succesfully,when i debug the code,error came and it was not completed....the error message is as shown..please do the neddful

C28xx: Flash Programmer: Warning: The configured device (TMS320F28335), does not match the detected device (). Flash Programming operations could be affected. Please consider modifying your target configuration file.

C28xx: Flash Programmer: Error erasing Flash memory.

C28xx: Flash Programmer: Error encountered when writing to flash memory

C28xx: Trouble Writing Memory Block at 0x338ba0 on Page 0 of Length 0x36

C28xx: GEL: File: C:\Users\joseph peter\Desktop\june 16\Flash_test_ti\Example_28335_Flash\Debug\Example_28335_Flash.out: Load failed.flsah try.docx

  • 0
    Guru 192875 points
    Hi Joe,

    Can you check with the Target Configuration file? Also, jump into a New workspace and import this project:
    C:\ti\controlSUITE\device_support\f2833x\v140\DSP2833x_examples_ccsv5\flash_f28335

    Regards,
    Gautam