• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 83 subscribers
  • Views 1535 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Emulation tool

Binesh Asok Kumar
Prodigy 240 points
Other Parts Discussed in Thread: TMS320F28031, CONTROLSUITE, TMDSDOCK28035

Hello all,

We use the TMS320f28031 in our company. I would like to know if there are any emulation software tools available for this micro controller where we can emulate our product for testing and troubleshooting and even developing. I have used Proteus before for smaller projects but will that support this micro controller. Please let me know. Thank you

-Binesh

  • 0
    TI__Guru 57255 points

    Hi Binesh,

    We have developed evaluation kits + emulator setups which are relatively cheap enough that the need for a 'simulator' is reduced.  This is especially true if you wish to interact with the chip and its peripherals directly.  Here my definition of a simulator is a tool that allows you to run C code without a piece of hardware - such as controlSUITE examples via CCS.  For the F2803x series, a TMDSDOCK28035 would be a good development kit.

    That being said, there is a place for software tools that simulate our chip as part of a system.  For example, for control system modeling.  I have not used Proteus specifically, but it looks like there is an option for their software tools to work with a C2000 device.  Other tools in this category are Matlab and VisSim (there are other good ones as well).


    Thank you,
    Brett

  • 0 in reply to Brett Larimore
    TI__Guru** 119670 points

    there are many of these type of HW/SW/model based simulation tools for C2000

    Mathworks Simulink & Embedded Target

    VisSim

    Plexim PLECS

    PowerSim

    Typhoon HIL

  • 0
    Mastermind 9005 points

    Hi Binesh,

    You can get some info on the MathWorks solution using MATLAB, Simulink, and Embedded Coder here:

    https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/484814