INSTASPIN-BLDC: Simulink with InstaSPIN?

There are instaSPIN-FOC and instaSPIN-BLDC based on C2000 MCU, and you can find many introductions and example project on both two motor control algorithms in C2000 controlSUITE or motorWare, but we didn't provide simulink schematics for both till now.
More detailed information about simulation for C2000 and motor control can be found in the link as below.
e2e.ti.com/.../484814

And you can find many support and training in two links as below.
www.ti.com/.../support-training.html
processors.wiki.ti.com/.../TMS320C2000_Motor_Control_Primer

Hi Kevin,

C2000 InstaSPIN code/algorithms are not available in Simulink. The best way to work with InstaSPIN and MathWorks code generation workflows, is to set up Processor-in-the-Loop (PIL) testing. In this scenario, you would connect your device and run your control algorithm and InstaSPIN stuff on the actual C2000 MCU, and your plant model and other data analysis pieces in MATLAB and Simulink.

Doc link (requires MathWorks login): Configure Processor-In-The-Loop (PIL) for a Custom Target

--

MathWorks offers training on Embedded Coder and Production Code Generation, but there are no materials specific to C2000 or InstaSPIN in our public courses. Course schedule.

--

More info and links on TI E2E here: https://e2e.ti.com/support/microcontrollers/c2000/f/171/p/484814/1845782

HTH,

-Brian