• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 83 subscribers
  • Views 468 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDM-BUCKBOOST-BIDIR: pick & place file

Steven Vancoppenolle
Prodigy 30 points
Part Number: TIDM-BUCKBOOST-BIDIR
Other Parts Discussed in Thread: CONTROLSUITE

Hi, 

We would like to assemble the TIDM-BUCKBOOST-BIDIR board with our automatic placement machine. In order to do so, we need a pick&place (coordinate) file for this board. It does not seem to be a part of the available documentation. Can it be provided for us?

Thanks.

  • 0
    TI__Genius 10820 points
    Hi Steven,

    I am checking with the designer who developed this solution. He will get back to you soon.

    Hrishi
  • 0 in reply to Hrishi Nene
    TI__Mastermind 43730 points

    Steven,

    This design was done in PADS, I no longer have the software available to me i.e. have access to PADS.

    What few people have done is, 

    1. We do release the source of the files in PADS  

    C:\ti\controlSUITE\development_kits\TIDM_BUCKBOOST_BIDIR\v1_00_00_00\~HWDevPkg\R1D

     if you have access to PADS you can generate those files. 

    2. You can import these files into a tool of your choosing, i.e. like altium ? and generate those files. 

    I have had people do both the methods (not specifically for the pick and place file, but for a variety of other reasons).

    I am providing the pick and place using method 2 below.. however there is a degree of exploration as the design was not done in alitum, which you will have to check .. 

    Pick Place for 574-00158-1D.txt
    Fullscreen
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    Altium Designer Pick and Place Locations
    C:\Git\development\development_kits\TIDM_BUCKBOOST_BIDIR\v1_00_00_00\int_HWDevPkg\Imported 589-00158-1D.PrjPcb\Project Outputs for 589-00158-1D\Pick Place for 574-00158-1D.txt
    ========================================================================================================================
    File Design Information:
    Date: 22/05/18
    Time: 14:41
    Revision: Not in VersionControl
    Variant: No variations
    Units used: mil
    Designator Comment Layer Footprint Center-X(mil) Center-Y(mil) Rotation Description
    V8 HOLE159 TopLayer HOLE159 5850.000 150.000 0 ""
    V7 HOLE159 TopLayer HOLE159 5850.000 3850.000 0 ""
    V6 HOLE159 TopLayer HOLE159 4150.000 3850.000 0 ""
    V5 HOLE159 TopLayer HOLE159 4150.000 150.000 0 ""
    V4 HOLE159 TopLayer HOLE159 3850.000 3850.000 0 ""
    V3 HOLE159 TopLayer HOLE159 3850.000 150.000 0 ""
    XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX