• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 83 subscribers
  • Views 376 views
  • Users 0 members are here
Support feedback
Options
Options

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

How to Program the TMS320F28069 ePWM Module for Space Vector Modulation?

TMS320F28069: How to Program the TMS320F28069 ePWM Module for Switched Reluctance motor control using position sensing using inductor mechanism

mohana sundari43
Intellectual 420 points
Part Number: TMS320F28069
Other Parts Discussed in Thread: CONTROLSUITE

Dear Sir,

Currently I am working on TMS320F28069 ePWM Module for Switched Reluctance motor control using position sensing using inductance measurement  mechanism.

How to program the PWM to control the SRM? }}

pl send a sample program at the earliest

  • 0
    TI__Mastermind 24095 points
    Hi,
    Are you using any specific position sensor? Regarding the specific PWM configuration for switch reluctance motor I'll check and get back to you.
  • 0 in reply to Subrahmanya
    TI__Guru** 114520 points
    Hi,

    We didn't have an example code for SRM application till now. Actually, the PWM configuration depends on what power stage are you using for the SRM, and what phase is the SRM. You might refer to the PWM configuration of BLDC example project in C2000 controlSUITE.
    C2000 ControlSUITE can be downloaded from the link below
    www.ti.com/.../controlsuite

    BLDC example projects could be found in below folder if you install the controlSUITE by default.
    C:\ti\controlSUITE\development_kits\HVMotorCtrl+PfcKit_v2.1\HVBLDC_Sensored