This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28069: How to Program the TMS320F28069 ePWM Module for Switched Reluctance motor control using position sensing using inductor mechanism

Part Number: TMS320F28069
Other Parts Discussed in Thread: CONTROLSUITE

Dear Sir,

Currently I am working on TMS320F28069 ePWM Module for Switched Reluctance motor control using position sensing using inductance measurement  mechanism.

How to program the PWM to control the SRM? }}

pl send a sample program at the earliest

  • Hi,
    Are you using any specific position sensor? Regarding the specific PWM configuration for switch reluctance motor I'll check and get back to you.
  • Hi,

    We didn't have an example code for SRM application till now. Actually, the PWM configuration depends on what power stage are you using for the SRM, and what phase is the SRM. You might refer to the PWM configuration of BLDC example project in C2000 controlSUITE.
    C2000 ControlSUITE can be downloaded from the link below
    www.ti.com/.../controlsuite

    BLDC example projects could be found in below folder if you install the controlSUITE by default.
    C:\ti\controlSUITE\development_kits\HVMotorCtrl+PfcKit_v2.1\HVBLDC_Sensored