CCS/TMS320F28035: Flash Program On Tms320f28035

Eswara rao Atchyuta

Intellectual 350 points

Part Number: TMS320F28035
Other Parts Discussed in Thread: CONTROLSUITE

Tool/software: Code Composer Studio

Greetings...........

Boot load this File through SCi or should i do any configuration to load hex file form C2prog.

C:\ti\controlSUITE\development_kits\HVMotorCtrl+PfcKit_v2.1\HVPM_Enhanced_Sensorless_2803x

over 6 years ago

0 Mark Labbato over 6 years ago

Guru 30330 points

Eswara,

I am not clear what you are asking. can you please reword your question?

-Mark

0 Mark Labbato over 6 years ago in reply to Mark Labbato

Guru 30330 points

Eswara,

It has been 5 days since your last post. I am going to close this thread. If you believe that this thread is not resolved, please clarify your question in a reply.

Thanks,
Mark

0 Eswara rao Atchyuta over 6 years ago in reply to Mark Labbato

Intellectual 350 points

Hello,

sir

we are working on SCI Bootloader we are unable to Configure Bootload process,

we want to load hex file through Sci.

suggest valuable information

thanks and Regards

0 Mark Labbato over 6 years ago in reply to Eswara rao Atchyuta

Guru 30330 points

Hi,

Do you have any specific questions about the process?

Please see the following App Note on the Serial Bootloaders: http://www.ti.com/lit/sprabv4
We also have a Wiki Page on the topic: processors.wiki.ti.com/.../C2000_Bootloader

Thanks,
Mark

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TMS320F28035: Flash Program On Tms320f28035