LAUNCHXL-F28069M: F28069M SCI-RX/TX

nanda nanda

Part Number: LAUNCHXL-F28069M

Hi justin,

i am NANDA, I am facing same problem, once i unplug the USB cable and plug it back again the application wont start, to restart application i have to press reset button. you have mentioned about reset RX interrupt line. Can help me out in this regard by specifying which flag or register i have to reset. because i have tried different register like Rxerror and some other its not working.

Regards

Nanda

over 7 years ago

0 Christopher Chiarella over 7 years ago

TI__Mastermind 30255 points

Nanda

Can you provide more details? Are you trying to run a flash application upon device reset? I'm not clear the involvement of the SCI.
For any boot up details, refer to TRM chapter: www.ti.com/.../spruh18

Best regards
Chris

0 Christopher Chiarella over 6 years ago in reply to Christopher Chiarella

TI__Mastermind 30255 points

Hello

I haven’t heard from you for a couple weeks, so I’m assuming you were able to resolve your issue. If this isn’t the case, please reject this resolution and reply to this thread with your latest status/update/information. If this thread locks, please click the "Ask a related question" button and in the new thread describe the current status of your issue and any additional details you may have to assist us in helping to solve your issues.

Best regards
Chris

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28069M: F28069M SCI-RX/TX