TMS320F2810: DSP

user6186250

Part Number: TMS320F2810

Hello everyone, I've a great problem, So I'm working with 2 DSP TMS320F2810, and I want to read the program is(read) the first one and put it the second (write). There is a software or someone can have the software witch can help me to do this? Is Something like "DSP Serial flash". It's will be very hepful. Thank's a lot for your help

over 6 years ago

0 Kevin Allen18 over 6 years ago

TI__Mastermind 45606 points

Hi,

Are you looking for the Flash API for this device?

See: http://www.ti.com/tool/SPRC125

If something else, maybe this serial flash programming App Report and the included software will assist:

http://www.ti.com/lit/an/spraaq2/spraaq2.pdf

best,

Kevin

0 user6186250 over 6 years ago in reply to Kevin Allen18

Prodigy 60 points

I'll try. have u ever use it to read and write a DSP. thank's a lot.

0 Todd Anderson78572 over 6 years ago in reply to user6186250

Guru 14640 points

This link may be helpful:

https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/573119

0 user6186250 over 6 years ago in reply to Todd Anderson78572

Prodigy 60 points

Thank you fit trying to help me. I’ve downloaded SDflash , my DSP « TMS320F2810 » is used on a macpuarsa inverter, and the software says that it « couldn’t see the target ». I can’t communicate between my soft « SDFlash » and my DSP. The connexion is made by an USB-RS232

0 Kevin Allen18 over 6 years ago in reply to user6186250

TI__Mastermind 45606 points

What JTAG emulator are you using? If you're using SD Flash can you verify that you've followed the steps in section 2.2 "SD Flash" of the App Note below:

http://www.ti.com/lit/spraal3

Alternatively you could try one of the other methods, like the On-Chip Flash Programmer within CCS.

Best,

Kevin

0 Kevin Allen18 over 6 years ago in reply to Kevin Allen18

TI__Mastermind 45606 points

Hi,

Any update on this issue from your end? Are you needing any further support from our side?

Best,

Kevin

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F2810: DSP