CCS: how to compile an assembly instruction in ccs,

jan Alrefai

Other Parts Discussed in Thread: C2000WARE

Tool/software: Code Composer Studio

Hello everyone

I am Jan, student at the university .. I am a beginner with the CCS .. I have little problems ..
I would like to know how to compile an assembly instruction in ccs,
I get this error message :
" C: \ Users \ HP \ AppData \ Local \ Temp \ {5B7A70FA-5660-47D0-9225-DC4A0AC9B8A1} ", ERROR! at line 13828: [E0000] CLA instructions cannot appear with non-CLA instructions in the same section
MMOV32 MR0, @ 0x8216 "

what should I do ??

Thanks
Jan

over 6 years ago

0 George Mock over 6 years ago

TI__Guru**** 251380 points

All of the CLA code should be in a separate source file.

Thanks and regards,

-George

0 jan Alrefai over 6 years ago in reply to George Mock

Prodigy 40 points

Hi George

Thanks for your Reply !!

I didn't quite understand what to do !!!

Thanks and regards,
jan

0 Lori Heustess over 6 years ago in reply to jan Alrefai

TI__Guru* 92830 points

There are examples in C2000Ware for the CLA. If you are using the F2837xS device, please take a look at the following example which has both C and assembly for the CLA.

C:\ti\c2000\C2000Ware_<version>\device_support\f2837xs\examples\cpu1\cla_mixed_c_asm\cpu01

I would suggest that unless you really need to use assembly that you instead use C. The CLA is supported by the compiler. Refer to the compiler reference guide for more information. This and other CLA code development resources can be found on this FAQ:

https://e2e.ti.com/support/microcontrollers/c2000/f/171/t/786227?-FAQ-CLA-Frequently-Asked-Questions

If this answered your question please press the "verified answer" button. If not, please provide more information on your question.

Regards

Lori

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS: how to compile an assembly instruction in ccs,