TMS320F28379D: RAM clear after Reset

Ralf Bartling

Hello,
I have a question regarding the behavior of the RAM after Reset.

Is the CPUtoCLA and the CPU1toCPU2 message RAM cleared after a reset?

Is there a difference between a watchdog reset and a power on reset?

Thank you very much
Ralf

over 6 years ago

0 Vivek Singh over 6 years ago

TI__Guru** 116981 points

Hi Ralf,

Yes, all the RAMs are cleared on XRSn and this same for WD reset as well as power on reset.

Regards,

Vivek Singh

0 Ralf Bartling over 6 years ago in reply to Vivek Singh

Expert 1205 points

Dear Vivek,
I have an additional question regarding the RAM after reset.

What happens with the other RAM areas (LS, M0, D0, GS…)? Are they also cleared after reset.

Thank you very much
Ralf

0 Vivek Singh over 6 years ago in reply to Ralf Bartling

TI__Guru** 116981 points

Hi Ralf,

What happens with the other RAM areas (LS, M0, D0, GS…)? Are they also cleared after reset.

All the RAMs are cleared after XRSn.

Regards,

Vivek Singh

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28379D: RAM clear after Reset